Review and use of Zippo Hand warmer

Zippo Hand Warmer
Zippo hand warmer w/ vintage Jon-e hand warmers

I have several vintage Jon-e style hand warmers and last winter I picked up a new Zippo Hand warmer to compare it to the older ones.

I have been using the Zippo this past year and can report that it works well. I picked up the black model but if I we to do it again I would get this chrome one. Other then that I am happy with my purchase.

To light you fill the hand warmer with lighter fluid and then put a couple of drops on the heater element. Light the element with a match and let that burn off. Once the visible flame is gone put the top on and you should running well.

The burner works like a catalyst. The initial burn on the heating element causes the lighter fluid to vaporize and then burn in the heating element. Once started they will run until they are out of light fluid, you remove the heating element or they run out of oxygen.

The heating element and shield are only held on by friction. So you may have to tweak them to get a tight fit. On the Zippo I did not have to do this but I did use a replacement element on an older Jon-e and that did require some tweaking.

I have read that you can use coleman fuel instead of lighter fluid but have never experimented with it. If you have please let me know how it works for you.

I got mine from amazon (Zippo Silver Hand Warmer). In the video I said they are around $20 but there are really under $10. At that price they are a killer deal. If you have amazon prime these end up being cheaper Zippo A-Frame Chrome Hand Warmer, Silver

The replacement burners are also available from amazon (Zippo Outdoor Line Handwarmer Replacement Burner (Silver, 2.38 x 5.81 x 5.31)). But at the current price you might as well get a new one.

Vintage ones are common on ebay : http://www.ebay.com/sch/i.html?_sacat=0&_nkw=jon-e+hand+warmer&_frs=1

As promised in the video here is the old manual

Jon-e hand warmer manual
Jon-e hand warmer manual
Jon-e hand warmer manual
Jon-e hand warmer manual

One thought on “Review and use of Zippo Hand warmer”

  1. To put the warmer out simply take the cover off the warmer and use the edge of cover to carefully pry off burner.It will go out in a few seconds. If you are careful you can catch the burner in the cover, if not make sure it lands on a dish or counter that will not melt.

Leave a Reply to Sam Cancel reply

Your email address will not be published.